By Sr. No. of EyeRIS

  • CNX-ES-288-xxxxxx – 3110/4160
  • CNXELxxxxx-  4160
  • CNXESxxxxx- 6090
  • CNXES7xxxx- 7090
  • CNXES8xxxx- 8090
  • CNXIMxxxxx- iMount- 8090
  • CNXIXTKxxxx- EyeRIS-IX series Touch
  • CNXIXxxxx-EyeRIS-IX Series Stylus


If Sr. No. are not Written on EyeRIS than we can check the physical appearance or by checking PID No. of Device in Device Manager.


By Physical Appearance

  • EyeRIS 3110 -Dark brown (rectangular Cube)/ Silver (Cylindrical)- Mounter Near LT Projector
  • EyeRIS 4160 Rectangular Cube (Red Colour- Mounted near LT Projector
  • EyeRIS 5090 Rectangular Cube (Red Colour)- Mounter Above White Board with Black Mount
  • EyeRIS 6090 Rectangular Cube (Red Colour/Silver)- Mounted Above Board with White Mount
  • EyeRIS 8090 Rectangular Cube with round Edge (Silver)- Mounted above WB with Black Mount.
  • EyeRIS-IX White and Grey Unit with Metalic Grey Mount.

By Device manager

  1. EyeRIS 3-Series/ 4-series/5-Series/6-series is detected as Imaging Device
    • EyeRIS 3110 is shown as “Vimicro USB camera (Altair)”
    • EyeRIS 4160/5090/6090 are shown as “Cybernetyx 3-D Visual Touch”.
  2. For EyeRIS 7-series and 8- Series, If EyeRIS Drivers is Installed:
    • EyeRIS 7-Series is detected under “Universal Serial Bus Controller” as “Cybernetyx Visual Touch Sensor 2.0”.
    • EyeRIS 8-Series is detected under “Universal Serial Bus Controller” as “Cybernetyx Visual Touch Sensor 3.0”.
  3. For EyeRIS 7-Series and 8-series, If EyeRIS Driver is not installed:
    • EyeRIS 7-Series is detected under "Other devices" as "Cybernetyx"
    • EyeRIS 8-series is detected under "Other Devices" as " Unknown"


To Check the PID No. 


Right clicking on device Name-> Properties-> Details-> Property-> Select Hardware ID from drop down list.

  • PID No. For LT EyeRIS 3-Series and 4-Series is 3450
  • PID No. For ST EyeRIS 5-Series and 6- Series is 3610